搜索
NEWS CENTER
Your location:
Homepage
/
/
/
Installation and composition of quality Disc chipper blade

Installation and composition of quality Disc chipper blade

  • Categories: Wood chipper
  • Time of issue: 2021-10-29 18:15

Installation and composition of quality Disc chipper blade

The principle of quality Disc chipper or wood crushing equipment is mainly on the blade. Now I will introduce you to the installation and composition of the quality Disc chipper.

quality Disc chipper
1. When tightening the flying knife and the bottom knife, it is necessary to use a torque wrench and a torque booster that can accurately torque, and tighten according to the regular torque value.
2. The quality Disc chipper flying knife bolts and bedknife bolts are specially made high-strength bolts (the bolt head has a symbol), and must not be replaced with ordinary bolts to prevent malfunctions, and must not be replaced with ordinary bolts to prevent malfunctions, high strength The service life of the bolt is 1 year. After 1 year of service, it is necessary to replace all the bolts.
3. It is necessary to replace the flying knives in complete sets. When sharpening, the sharpening amount of the two flying knives should be the same, to ensure that the components of each set of flying knives are the same, and to ensure that the components of each set of flying knives are the same, so as not to cause the machine to oscillate.
4. It is necessary to add coolant when sharpening the flying knife and the bottom knife to prevent overheating and burning of the blade or creating a scene of curling, so as to ensure the wear resistance of the blade.
5. The flying knife is usually sharpened once in 1-2 shifts. After the flying knife is changed 4 times, the bottom knife should be taken out:
  ① Check the condition of the bedknife and replace the cutting edge of the bedknife (the bedknife usually has 2-4 cutting edges, one cutting edge is worn, replace the other cutting edge to use, after all the cutting edges are worn, sharpen it once).
  ②The contact surface of the bedknife holder should be smooth, so that the bedknife holder can be easily removed when replacing the bedknife.
6. The adjustment scale of the quality Disc chipper blade is a fixed value, and no changes are allowed. If the gap between the flying knife and the bed knife does not meet the requirements of the rules, only the bed knife size is allowed to be adjusted.

Keyword:

Return

HONGXIN MACHINERY

Call the hotline: 0086 18863070778 

 E-mail: snowsure@163.com

ADD: Yuancheng, Changshan Town, Binzhou, Shandong, CHINA 

Hotline: 0086 18863070778

E-mail: snowsure@163.com

ADD: Yuancheng, Changshan Town, Binzhou, Shandong, CHINA 

© 2021  Shandong Hongxin Machinery Co., Ltd.   All Rights Reserved.

 鲁ICP备16046072号-1   Privacy Policy   Powered by:300.cn  

terminated