2022

Wood chipper manufacturers take you to understand the Disc Chipper

There are two types of wood chippers: stationary and mobile. The fixed type is mostly used in factories; the mobile type is generally used in forest areas and mountain farms. According to the structure of the working parts, it is divided into two types: drum chipper and disc chipper. According to the feeding method, there are two types oblique feeding and flat feeding.

Disc chipper. Wood chipper manufacturers tell you that a disc chipper consists of a cutter head, cutting knife, bedknife, cutter head blade, and so on. There are grooves for installing cutting inserts on the front of the cutter head, which is arranged at an offset of 10° to 15° in the radial direction. There is a wedge-shaped adjustment block on the bottom of the blade to adjust the protrusion of the blade; the rear is equipped with a distance adjustment block to adjust the compensation length of the blade after sharpening.
Wood chipper manufacturers tell you that the disc chipper has a through the slot on the cutter head along the direction of the blade, and the chipped wood chips can be transferred to the other side of the cutter head. Blades are evenly arranged on the outer edge of the cutter head, and the airflow generated by the blades blows the wood chips out of the discharge port.
Wood chipper manufacturers tell you that there are three types of disc chippers: less-knife, multi-knife, and helical face cutters. The first two types of wood chips have poor uniformity. The cutting surface is all in contact with the cutter head, the unit pressure is small, the wood chips are neatly cut, the broken wood chips are few, the cutter headwear is small, the length of the cut wood chips is the same, and the qualified rate of cutting wood chips can reach about 97%.
The above information is the Wood chipper manufacturer's introduction of the Disc Chipper, hope it helps you.