2022

The cooler & screener manufacturers introduce the cooler

The cooler & screener manufacturers tell you that coolers are a type of heat exchange equipment used to cool fluids. The cooler & screener manufacturer tells you that the cooler usually uses water or air as the coolant to remove heat, and can be mainly divided into tubular coolers, plate coolers, and air-cooled coolers.

The cooler & screener manufacturers tell you that coolers are heat exchange devices commonly used in metallurgy, chemical, energy, transportation, light industry, food, and other industrial sectors. It is suitable for different working conditions such as condensation, heating, evaporation, and waste heat recovery of coolers. Therefore, among the many types of heat exchangers, coolers and tubular heat exchangers still occupy an important position.
The cooler & screener manufacturers tell you that coolers are a type of heat exchange equipment used to cool fluids. Usually, water or air is used as a coolant to remove heat. There are partition coolers, spray coolers, jacket coolers, and coil coolers. It is widely used in high-power silicon rectifiers and large electrical equipment such as induction furnaces and intermediate frequency furnaces as pure water, water-air, oil-water, and oil-air cooling devices for cooling auxiliary protection machines.
The cooler & screener manufacturer tells you the cooler is mainly based on the partition, hybrid, and regenerative heat exchanger types. The working principle of the cooler, heat transfer calculation, structural calculation, flow resistance calculation, and design procedures, in the heat exchanger A book has many illustrations and detailed examples.
The above information is the cooler & screener manufacturer's introduction of the cooler, hope it helps you.