2022

Wood chipper manufacturers take you to understand the Drum Chipper

There are two types of wood chippers: stationary and mobile. The fixed type is mostly used in factories; the mobile type is generally used in forest areas and mountain farms. There are two types of drum chippers and disc chippers according to the structure of the working parts, and there are two types of oblique feeding and flat feeding according to the feeding method.

Drum chipper. Wood chipper manufacturers tell you that drum chipper is mainly used to cut branches, small diameter wood, veneer, slats, etc. with a diameter or thickness of less than 120 mm, and the cut wood chips are used as raw materials for fiberboard and pulp.
Wood chipper manufacturers tell you that its cutting mechanism is a rotating drum on which several flying knives are installed, and when the flying knives rotate, the wood is processed into craft wood chips. There are many squares through holes on the outer edge of the drum, which can make the wood chips discharge smoothly.
Wood chipper manufacturers tell you that its feeding mechanism consists of a feeding interface, upper and lower feeding rollers, and a feeding gap adjustment mechanism. The wood entering from the feeding interface is pressed by the upper and lower feeding rollers and is cut at a certain speed. Mechanism feeds to control the size of the cut wood chips.
Wood chipper manufacturers tell you that when processing thick wood, it is adjusted by the feeding gap adjustment mechanism. After the wood chips are screened, the larger ones must be smashed again between the blade and the baffle. The wood chips cut by this chipper are of lower quality.
The above information is the Wood chipper manufacturer's introduction of the Drum Chipper, hope it helps you.