2022

The function Features of the drum chipper

The base of the drum chipper is welded with high-strength steel plates, which is the support foundation of the whole machine; two flying knives are installed on the knife roller, and the flying knives are fixed on the knife roller with specially manufactured flying knife bolts through the pressure block. On the knife roller; according to the different thicknesses of the raw materials to be cut, the upper feeding roller assembly can float up and down within a certain range with the help of the hydraulic system; the cut qualified flakes fall through the mesh screen holes and are discharged from the bottom, and the large flakes will be Cut again in the machine.

The hydraulic system of the drum chipper: the hand oil pump supplies oil to the oil cylinder, which can start the cover to facilitate the replacement of the blade. During maintenance, the upper feeding roller assembly can be lifted to adjust the gap between the flying knife and the bottom knife. and disassembly of the comb plate.
Drum chipper is a piece of common equipment in the wood processing industry. More and more users need this kind of wood chipping equipment. Hengchang Environmental Protection Machinery drum wood chipper has advanced structure, high quality of chipping material, and wide applicability of raw materials. , the prospects are very broad.
The drum wood chipper has its unique advantages, not only in the structural composition, but also in the low operating cost, convenient operation, high production efficiency, good finished product quality, safety, and reliability. Usually, after the raw materials are cut by chipper equipment, the finished product becomes small wood chips of a certain specification, which can be used as raw materials for particleboard, medium density board, fiberboard, and other industries, and it is very convenient to use.
Through the above introduction and analysis of the function Features of the drum chipper, hope it helps you.