2022

The structure of the Drum chipper

Drum chipper is composed of a body, knife roller, upper and lower feeding mechanism, hydraulic system, feeding device, and other parts.

1. The machine body of the Drum chipper is welded with high-strength steel plates, which is the support base of the whole machine.
2. Two or three or four flying knives are installed on the knife roll of the Drum chipper, and the flying knives are fixed on the knife roll with the specially manufactured flying knife bolts through the pressure block.
3. The hydraulic system of the Drum chipper is supplied by the oil pump to the oil cylinder, and the cover can be activated to facilitate the replacement of the blade; during maintenance, the upper feed roller assembly can be lifted to adjust the gap between the flying knife, the bottom knife, and the comb plate. disassembly.
4. The upper and lower feeding mechanism of the Drum chipper is composed of the feeding interface, the upper and lower feeding rollers, and the feeding gap adjustment mechanism. Feed, control the size of cutting wood chips; when processing thick wood, it is adjusted by the feeding gap adjustment mechanism.
Through the above introduction and analysis of the structure of the Drum chipper, hope it helps you.