06

2022

-

05

Double shaft hammer mill manufacturers talk about the definition of hammer mill


Double shaft hammer mill manufacturers believe that hammer mills are similar to hammer crushers used in general industry. The main purpose of the hammer crusher is to turn solid materials into small pieces under the action of mechanical force. Therefore, it is widely used in metallurgy, coal, construction engineering and feed processing in my country.

  Double shaft hammer mill manufacturers believe that hammer mills are similar to hammer crushers used in general industry. The main purpose of the hammer crusher is to turn solid materials into small pieces under the action of mechanical force. Therefore, it is widely used in metallurgy, coal, construction engineering and feed processing in my country.

Double shaft hammer mill

  The double-shaft hammer mill manufacturer recommends using a mechanical method to overcome the internal cohesion of the material and split it, which is called crushing or fine grinding. Generally speaking, the splitting of bulk materials into small pieces is called crushing, and the breaking of small pieces into fine powder is called fine grinding. Crushing and fine grinding are also commonly referred to as crushing.

  The following matters should be paid attention to during the granulation operation of the double-shaft hammer mill:

  (1) Before starting the double-shaft hammer mill, check whether there are tools, sundries, etc. on the machine, and open the valve to check whether the rotating parts and the discharge screen are damaged.

  (2) Appropriate lubricating oil should be added to each lubricating part.

  3) All fastening parts should be tightened.

  (4) After the double-shaft hammer mill is turned on, run it for 2 minutes in an idle state, and observe the machine. If it runs normally, it can be fed and granulated.

  (5) The speed at which the feeding roller bites into the rubber material must be synchronized with the feeding speed. If it is found that the feeding roller has broken pieces or accumulated films, the machine should stop immediately to adjust the roller distance of the feeding roller.

  (6) During the granulation process of the double-shaft hammer mill, if it is found that the machine has abnormal noise or increased vibration, it should be stopped immediately for inspection.

  (7) After the granulation operation is completed, the cleaning work must be done well.

Double,shaft,hammer,mill