11

2022

-

04

Methods of improving work efficiency of chippers Disc chipper in china factory


The appearance of machinery and equipment Disc chipper in china factory has greatly liberated our labor force, but because of different industries, the requirements for chippers are also very different. Different industries have different requirements on the thickness and size of wood chippers. The requirements are different, how to adjust the distance between the flying knife and the bed knife according to the needs, how to improve the working efficiency of the mechanical equipment and improve the quality of wood chips.

  The appearance of machinery and equipment Disc chipper in china factory has greatly liberated our labor force, but because of different industries, the requirements for chippers are also very different. Different industries have different requirements on the thickness and size of wood chippers. The requirements are different, how to adjust the distance between the flying knife and the bed knife according to the needs, how to improve the working efficiency of the mechanical equipment and improve the quality of wood chips.

Disc chipper in china

  1. Disc chipper in china factory should be based on different materials: under normal circumstances, drum chippers can cut small-diameter wood, veneer, slats, etc. below 120 mm, and the cut wood chips can be used as fiberboard and pulp. material.

  2. Disc chipper in china factory found that too thick, too thin, too short, too thin, and irregular materials (undifferentiated stumps, branches, etc.) did not have the function of uniform cutting.

  3. The use of wood chips Disc chipper in china factories: Usually, paper mills do not have specific requirements for the size of wood chips after processing, but they are generally similar. The Chinese disc chipper factory should feel that no matter what kind of log it is, it must be peeled, that is to say, the wood is peeled and then processed into wood chips by the chipper.

Disc,chipper,in,china