23
2022
-
03
What are the use methods of household feed Vertical pellet mill
1. The household feed Vertical pellet mill can be turned on after adding hyperbolic gear oil to the gearbox.2. Install the pellet machine smoothly, check whether the steering meets the requirements, whether the screws in each part are loose, loosen the clearance adjustment screws on the roller axle seat, and make the feed machine in a no-load state, and it can be put into use after starting and running normally.
How to use household feed Vertical pellet mill:
1. The household feed Vertical pellet mill can be turned on after adding hyperbolic gear oil to the gearbox.
2. Install the pellet machine smoothly, check whether the steering meets the requirements, whether the screws in each part are loose, loosen the clearance adjustment screws on the roller axle seat, and make the feed machine in a no-load state, and it can be put into use after starting and running normally.
3. Before the new machine of household feed Vertical pellet mill is used for the first time, take 10 catties of sawdust or grass meal vegetable oil or waste oil and stir it evenly, and then turn the clearance adjustment screw. Make the two rollers rotate at the same speed, gradually add the refueling feed, and at the same time continue to screw the adjusting screw of the pressing wheel until the material is slowly discharged, the extruded pellets are repeatedly squeezed to make the grinding hole smooth and smooth, and then the required mixed feed is processed. .
4. The household feed Vertical pellet mill should add about 5% of water when the feed is processed with more refined fibers. If there are too many concentrates in the mixed feed, the amount of water added can be reduced as appropriate. After processing, add a small amount of water in advance The oil mixed with edible oil is conducive to the next startup, and avoids the feed drying in the hole after the shutdown.
5. After the household feed Vertical pellet mill is processed, loosen the clearance adjustment screw to keep the rollers in a free state. After the machine is stopped, remove the residual material from the upper and lower bins, especially the residual material at the bottom of the shaker to avoid damage to the bearing.
Vertical,pellet,mill
CONTACT US
E-mail: snowsure@163.com
Tel: +86-18863070778
whatsapp: 8615762157273
Wechat: +86-15762157273
Skype：snowsure
Address: Yuancheng, Changshan Town, Binzhou, Shandong, CHINA
Copyright © Shandong Hongxin Machinery Co., Ltd.