04

2022

-

03

Wholesale Drum Chipper Equipment Use and Care Instructions


Before starting the test run of the wholesale drum chipper, it is necessary to strictly check whether the installation of all parts of the machine meets the requirements, whether the screws and bolts are loose, and the belt can be gently pulled by hand to test the rotation, and whether there is any phenomenon such as collision. At the same time, check the rotation direction, and it is strictly forbidden to crush flammable and explosive materials to avoid accidents.

Wholesale drum chipper equipment use and maintenance instructions:

Drum chipper

1. Before starting the test run of the wholesale drum chipper, it is necessary to strictly check whether the installation of all parts of the machine meets the requirements, whether the screws and bolts are loose, and the belt can be gently pulled by hand to test the rotation, and whether there is any phenomenon such as collision. At the same time, check the rotation direction, and it is strictly forbidden to crush flammable and explosive materials to avoid accidents.

2. In the sale of wholesale drum chippers, uniform cutting should be maintained to ensure the crushing quality and normal sales. At the same time, overloading of the motor is strictly prohibited to ensure the normal operation of the machine.

3. In addition to frequently checking the tightening and looseness of various parts, more attention should be paid to checking the wear of wearing parts. If the wear is serious, it should be replaced in time to avoid damage to the main components. and take necessary fire protection measures

4. Due to the high speed of the wholesale drum chipper, in addition to the correct and firm installation, good lubrication should be maintained to maintain the normal operation of the machine. Under normal circumstances, the bearing temperature does not exceed 70 degrees, which is normal. Add butter and molybdenum disulfide to the bearing of the main engine once a week, and the effect of high-speed butter is

Drum,chipper