Matters needing attention in the use and operation of quality Single shaft hammer mill
After purchasing the quality single shaft hammer mill, be sure to read the instructions for use of the crusher carefully, familiarize yourself with the use and maintenance conditions, and you must not operate it alone if you do not fully understand it.
1. It needs to be operated according to the operation manual
After purchasing the quality single shaft hammer mill, be sure to read the instructions for use of the crusher carefully, familiarize yourself with the use and maintenance conditions, and you must not operate it alone if you do not fully understand it. Try to have a professional be present to prevent it from being brought. Unnecessary accidents.
2. It is forbidden to start operation without checking the internal cavity of the machine before starting the machine
Before the quality single shaft hammer mill starts to work, you should first check whether there are foreign objects such as ore or iron in the crushing cavity. Because the crusher is not allowed to start under load, it will cause electrical tripping or damage to machine parts. Check the crushing cavity before driving. If there is foreign matter such as ore or iron, it must be removed before starting. Normal feeding can be started after the crusher is running normally to prevent unnecessary damage to people and machinery. .
3. It is forbidden to use unstable power supply or unqualified wire circuit
Using an unstable power supply will cause voltage instability, which will lead to unstable circuits in mechanical equipment and shutdown failures. Use of unqualified wires and circuits will result in unbalanced current capacity in the connector terminals, which is very easy to cause between electrical appliances. The local overheating produces a natural phenomenon.
4. It is forbidden not to turn off the power when the power is off
Often many people don’t pay attention to this detail, especially when there is a temporary power failure, you must remember to turn off the power first, otherwise it will reduce unnecessary damage to the mechanical equipment when you call again. Remember to turn off the power after work. , And then pack up and leave the crusher post to develop a good habit.
If it is an artificial shutdown, the feeding work should be stopped first, and the motor can be turned off after waiting for the crushed material in the crushing cavity to be completely discharged. After the material is removed, it can be started again.
5. It is forbidden to only use the quality single shaft hammer mill without maintaining the equipment
For the quality single shaft hammer mill, daily maintenance is very important. If it is only used for a long time without maintenance, it will bring a lot of unnecessary wear to the mechanical equipment, and indirectly reduce the life cycle of the crusher, so we are When using mining machinery and equipment, it is necessary to frequently maintain the equipment, and apply lubricating oil regularly and regularly, so that the machinery and equipment can play a stable role and generate stable income.