The structural characteristics of the quality Briquetting machine are conducive to maintenance
The quality Briquetting machine has a variety of models such as metal chip briquetting machine, sponge iron briquetting machine, wood briquetting machine, iron fine powder briquetting machine, etc.
The quality Briquetting machine has a variety of models such as metal chip briquetting machine, sponge iron briquetting machine, wood briquetting machine, iron fine powder briquetting machine, etc., and is suitable for various raw materials such as particle materials, powders, and blocks. It is widely used in pharmaceutical, chemical, smelting, construction and other industries. Now, hydraulic presses with hydraulic transmission technology are widely used.
The structural characteristics of the quality Briquetting machine are: First, the motor drives the reducer to drive the spindle bearing, and then the spindle bearing drives the pressure roller. The structure is simple, which is conducive to maintenance; secondly, it is very convenient to adjust the radial gap between the pressure roller and the mold, which can guarantee two The gap between the pressure roller and the mold; third, by adding the upper and lower electric heating rings, the ring mold can be heated, which is beneficial to material molding.
The material or manufacturing structure design of the hydraulic cylinder of the quality Briquetting machine is unreasonable. If the low-strength steel cylinder is abused, the stability factor will decrease. If the hydraulic cylinder is used for a long time, the diameter of the hydraulic cylinder will inevitably expand and deform. Then, find out the related reasons for the expansion of the hydraulic cylinder wall of the scrap iron briquetting machine.
Cut or rub the straw or pasture to be pressed, the length is less than 50mm, and the water content is controlled within the range of 10-25%. The material is sent to the feed port through the feed conveyor, and the main shaft rotates to drive the pressure roller to rotate, and then the pressure roller rotates. The material is forced to squeeze out of the mold hole and fall from the discharge port. Pack in bags after cooling.
The energy components of a quality Briquetting machine usually refer to hydraulic pumps and hydraulic motors. The hydraulic pump and the hydraulic motor are the energy conversion assembly in the hydraulic system. The difference is that the hydraulic pump can convert the machinery that drives the electric idea into the pressure energy of the oil.