Brush Chipper with chain feed conveyor is manufactured on the basis of shearing and cutting theory. Pressure stress is reduced on engineer parts, and the operator’s work efficiency is improved. If the feeding material is too big or too hard, or the diesel engineer overloads, the system will switch from continuous feeding to intermittent feeding. If jamming occurs, the operator can control the machine manually, and reverse the feeding roller. Besides, the diesel engine waste gas is connected to the chipping chamber, which increases the discharge power.
It is strong and durable, with a high production capacity, low energy consumption, and uniform chipping quality. It is also low noise, emits zero pollution, and is easy to operate and maintain. It is driven by diesel engine power, and can be towed by vehicles to worksites.
It is primarily used to chip branches, undersized logs, wood cutting debris and shrubs to prepare raw material for paper mill, MDF board factory, biomass power plant, organic fertilizer factory, and also for landscaping job and tree care job.
Output wood chip is like the below photo.
|5.2 x 1.8 x 3.35 m
|960 x 512 mm
|Feed roller quantity
|2 (Up Feed Roller+ Down Chain Feed Conveyor)
|Φ 655 x 500 mm
|Feed roller size
|Φ 600 x 480 mm
|270 x 110 x 18mm
|2 Cutting Edge
|4 Cutting + 1 Stationary
|Chain feed conveyor length
|Commins Turbocharged Engine 160HP
|Max wood diameter
|Torque of feed system
|Main transmission mode
|Industrial clutch of American brand WPT,
and belt transmission.
|Auto feed by hydraulic motor with adjusting valve
|Stationary, Movable by towing
|Fuel tank capacity
|Hydraulic oil tank capacity
|24V grease auto lubricating system,
Lubricating the related parts at regular time.
|Engine rotation speed, Water temperature, Engine oil pressure, Electric quantity, Fuel volume, Hydraulic oil volume, Working hours.
|Rotor security lock, Emergency stop handrail, Emergency stop switch, Rear indicator light.
|1 x 20’GP