2023

Brush Chipper manufacturers take you to understand the chipper

Brush Chipper manufacturers tell you that chipper is also called wood chipper, which belongs to one of the series of wood processing equipment. It is widely used in the material preparation section in the production process of textile, paper, pulp, wood-based panels, and other industries. The main cutting raw materials of this machine are small-diameter wood, bamboo, board, and skin after peeling, and the remaining material of harvested secondary fuel wood, etc.

Brush Chipper manufacturers tell you that the chipper has insufficient uniformity for materials that are too thick (above 350mm), too thin (below 30mm), too short (below 250mm), too thin (below 5mm), and irregular materials (undecomposed stumps, branches, etc.). The function of cutting, or just cutting the raw materials on the original basis, the slicing of bamboo with a wall thickness of less than 5 mm is insufficient, and the function of layered cutting is used. . Wood chips are mostly used as raw materials for pulp, hydrolysis, and wood-based panels.
Brush Chipper manufacturers tell you that chippers can be divided into two categories according to their mechanical structure: disc chippers with the cutting knives mounted on a disc and drum chippers with the cutting knives mounted on a cylindrical drum. The disc chipper is mainly used for cutting logs, and the quality of the wood chips is good, and it is widely used in pulp and paper mills, while the drum chipper has wide adaptability to wood species and can be used for various wood such as veneer.
The above information is the Brush Chipper manufacturer's introduction of the chipper, hope it helps you.